The products contained on this site are intended for sale to adults of the legal smoking age in their respective place of residence. By clicking Enter below, you certify that you are of the legal smoking age in your state of residence. You will be required to verify your age before completing any order.
The LUC V4 Four Bay LCD Battery Charger by Efest is a well-built universal charger intelligently designed to be compatible with virtually any type of rechargeable battery. It sports a crystal clear LCD screen that displays each battery’s charging stats / voltage rating, it also comes equipped with a wall adapter.
The Efest LUC V4 battery charger has four independent charging ports and is compatible with most 3.7 volt Li-Ion or LiMn batteries like: 10440, 14500, 14650, 17670, 18350, 18490, 18500, 18650, 18700, 26500 and 26650. This universal smart charger is also equipped with an array of protection features like zero voltage activation function, overcharge protection, short circuit protection and reverse polarity protection.
One unique feature of the LUC V4 battery charger by Efest is its dual USB charging ports located on the back section of the device. With a fully charged battery in charging port 2, the LUC V4 charger can charge electronic devices such as: smart phones, music players, gaming devices, etc, a feature that is perfect when on the go.
Efest LUC V4 Four Bay LCD Battery Charger Features:
Charging Input:
If the LUC V4’s rectangle button is pressed, the charging mode (0.5A / 1A / 2A) can be changed in order to charge batteries of different sizes (ex: 3.6V / 3.7V Li-Ion batteries)
USB Output:
DC5V (1A & 0.5A) USB Ports are compatible with most USB equipped consumer products
0.5A / 1A Rate: Can charge 4 batteries at once (10440/14500/14650/16340/16650/17650/17670/17350/18350/18490/18500/18650/22650)
2A Rate: Can charge 2 batteries at the same time (25500 & 26650)
Low Power Alarm:
When charging a USB device off of a battery placed in the charger, the transparent button will flash blue when the power of the battery is lower than 15%
Reverse Polarity Protection:
While the charger is plugged in, each charging port features its own separate reverse polarity protection that prevents short circuits from occurring during use.
Zero Voltage Activation Function:
When the Efest LUC V4 battery charger is in standby mode and an over-discharged battery (voltage below 2V) is placed into a charging port, the zero voltage activation will go off. The red light will turn on after battery activation and will then begin to charge.
Over-Charge Protection & Auto-Monitor Charge:
The LUC V4 battery charger will automatically stop charging once the battery has reached its full capacity in order to prevent overcharging or damaging cells.
1-Amp Portable USB Charging Output:
The LUC V4 charger is able to charge most USB devices such as smart phones, iPads, music players, gaming devices, etc. To use this feature, disconnect the device from the wall, place a fully charged battery into charging port #2, plug your device into one of the USB ports located on the back of the charger and press and hold the rectangle button of the charger for 2 seconds to begin charging.
Efest LUC V4 Four Bay LCD Battery Charger Specs:
AC input Power: 100-240V 50/60Hz
AC output Power: DC 12V 2A
DC input Power: DC 12V 2A
0.5A CC current: 500mA ± 5%
1A CC current: 1000mA ± 5%
2A CC current: 2000mA ± 5%
TC current (battery voltage < 2.9V): 10mA~20mA
Activation current (battery voltage < 2V): 10±1m A
USB output floating Voltage: 5.0-5.5V
USB Output floating current: < 10mA
Auto cut-off voltage: 4.23V ± 0.05V
CV cut-off current: < 10% max current
Standby current: < 20mA
Maximum Output current: 1A
Battery output Cut-off voltage: 3.0 ± 0.05V
Auto recharge voltage: 3.9 ± 0.15V
Dimensions: 228.6mm x 114.3mm x 43.18mm
Weight: 0.95 lbs (without batteries or power cord)
Efest LUC V4 Four Bay LCD Battery Charger Includes:
(1) Efest LUC V4 Four Bay LCD Battery Charger
(1) Wall Adapter
(1) User Manual
** Batteries are sold separately
** DO NOT USE with battery types not listed above as doing so may cause personal injury. DO NOT leave batteries charging unattended or overnight.
** Always charge on a surface away from flammable materials (an empty kitchen counter is ideal)
NOTE:
- Use special caution when using Li-Ion batteries, make sure you always purchase from a reputable manufacture / reseller and always follow the manufacturer’s charging guides.
- ALWAYS charge in / on a fireproof, clean surface that is free of flammable items
- NEVER leave batteries charging unattended
** Use at your own risk. VOLCANO will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper handling / use of this charger or batteries. Please make sure that you have a proper understanding of battery use and care before using batteries, especially Lithium Ion batteries.
The Edge 2 Bay Battery Charger by Lithicore is a dependable smart battery charger that is compatible with various types of rechargeable batteries and is perfect for batteries used for vaping. It is built with bright LEDs that indicate the charging status of up to two batteries while charging and also includes a wall adapter.
The Edge 2 Bay Battery Charger comes equipped with dual battery slots and can charge different types of batteries. This battery charger can be used for all kinds of lithium ion batteries such as 10440, 14500, 14650, 16340, 16650, 17650, 17670, 18350, 18490, 18500, 18650, 22650, 20700, 21700, 26500, 26650 Cylinder.
For added safety, the Edge 2 Bay Charger is backed by multiple protection features such as reverse polarity, overcharge protection, 0V activation function, and is made with fire-retardant material.
Lithicore Edge 2 Bay Charger Features: Fast Charge Capable: 2.0A Charge Rate (single battery) 1.0A Charge Rate (dual battery)
0V activation function:
Insert the low-voltage battery (battery voltage ≤ 2.8V) within 5 minutes of the charger in standby mode, the charger will automatically recover the battery. Recovery time may vary depending on the discharge time and discharge level. Once the battery has recovered, the charging process will proceed normally.
Overcharge protection:
If the batteries are fully charged and the charger is still connected to a power source, the charger will automatically stop charging.
Reverse polarity protection:
While the charger is in standby mode, neither the positive nor negative poles can cause a short circuit to the slots or cause cross circuiting. If the batteries are placed in the slots in reverse, it will not cause damage to the batteries or charger.
LED display function:
Each slot will display the charging status of the battery.
Description of the LED indication function:
The LED indications are:
Each slot displays 5 lights
Light will flash while charging
Light will stay on when battery is fully charged
All 5 lights will flash when charging is abnormal
When the EDGE 2 charger is connected to a power source, the system will begin self-detection and all of the LED indicators will light up. The charger will automatically enter standby mode after 1.5 seconds. Please check battery specifications before use. The battery must be compatible with the EDGE 4 charger. Misuse can cause damage to the battery or the charger. Please do not attempt to charge incompatible batteries.
Lithicore Edge 2 Bay Battery Charger Specs:
2.0A constant current charging: When one or two batteries are placed in any slots the charging current is 2A.
1.0A constant current charging: When three or four batteries are placed in the slots the charging current is automatically set to 1A.
Cut-off voltage for charging: 4.20 ± 0.05V
Cut-off current for constant voltage charging: <200mA
Input standby current: <40m A/100V-230V AC 50HZ/60HZ
** Batteries are sold separately ** DO NOT USE with battery types not listed above as doing so may cause personal injury. DO NOT leave batteries charging unattended or overnight. ** Always charge on a surface away from flammable materials (an empty kitchen counter is ideal) NOTE: - Use special caution when using Li-Ion batteries, make sure you always purchase from a reputable manufacture / reseller and always follow the manufacturer’s charging guides. - ALWAYS charge in / on a fireproof, clean surface that is free of flammable items - NEVER leave batteries charging unattended ** Use at your own risk. VOLCANO will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper handling / use of this charger or batteries. Please make sure that you have a proper understanding of battery use and care before using batteries, especially Lithium Ion batteries. Learn more about batteries & battery safety via BatteryUniversity.com
A durable Pyrex replacement glass for the SMOK TFV9 Sub-ohm Tank. Each transparent glass is bulb-shaped with a 28mm diameter and 6.5ml e-liquid capacity.
A durable, bubble-shaped Pyrex glass replacement for the SMOK TFV16 Lite sub-ohm tank. This replacement glass is the same 5mL standard size that comes pre-installed with the TFV16 Lite Tank.
Pyrex Replacement Glass - Smok Tech TFV16 Lite - 5ML Transparent
has a rating of 4.9 stars
based on 27 reviews.
USB-C Cord
Regular price$34.99
Save $-34.99
Product Description
A durable white 9" USB-C cable to charge devices with a USB-C port.
Epoxy Resin Drip Tip - TFV16 Multi-Colored
Regular price$34.99
Save $-34.99
Product Description
Please Note: Drip tip will be randomly picked and shipped out.
Style your tank with a vibrant and durable epoxy resin 810 drip tip. The wide-bore style and smooth edges allow for more airflow and comfortable use. Made specifically for the TFV16 Sub Ohm Tank, but will fit other 810 drip tip tanks.
Includes:
(1) Random Multi-Color Expoxy Resin Drip Tip
Epoxy Resin Drip Tip - TFV16 Multi-Colored
has a rating of 4.8 stars
based on 4 reviews.