Sale is Over

Today, we are making it easy to upgrade to the LAVATUBE. Save 40% off Gold and Pink LAVATUBES devices and enjoy $30 off all Pink and Gold starter kits. This sale lasts 24 hours only and supply is limited so don't  wait. This is the first sale offered by VOLCANO Fine Electronic Cigarettes on the LAVATUBE device and starter kit and it only lasts 24 hours. 

Our LAVATUBE Version 2 ecigarette Kit is the culmination of our teams R&D and is the most powerful and customizable eCig we currently offer. We've reworked the design of the entire device and are proud to offer the most advanced variable voltage vaping device currently on the market.

Tech Specs:

Selectable Voltage Range: 3v to 6v in 0.1v increments
Power / Activation Button: Click five times fast to power the device on / off; Hold the button down to activate.
+ Button: On press, increases voltage by .1 increments between 3volt and 6 volt. When you reach 6 volts, the user starts back at 3 volts
- Button: On press, decreases voltage by .1 increments between 3volt and 6 volt. When you reach 3 volts, the user starts back at 6 volts.
Regulated Output: Advanced pulse-width modulation power output with accurate voltage settings tuned to VRMS
Auto Shutoff: If the activation button is held down for 15 seconds or longer, the LAVATUBE Version 2 will shut itself off until the button is released to prevent overheating the atomizer and the device.
Short Circuit/Atomizer Protection: The LAVATUBE Version 2 can recognize an atomizer with too low of a resistance for the current voltage setting and will drop the voltage to 3.7v to protect both the battery and atomizer. If the atomizer is too low or shorted out it will shut off power to the device to protect the LAVATUBE Version 2 from being damaged.
Reverse Battery Protection: Protects the device in case you put the battery in the device backwards
Battery Monitoring/Over-Discharge Protection: The device will monitor the battery voltage and automatically display "LO" on the display and turn off when the battery is discharged, preventing damage to the battery and the device by overly depletion.
Battery Voltage Meter: The LAVATUBE Version 2 has a voltage meter built in, simply press and hold the - button for 5 seconds and it will display the voltage of the battery. This way you can monitor the power left in the battery before it needs to be recharged. 18650 batteries provide 4.2v at peak charge and over the life of the battery that voltage will decrease to about 3.2v level before needing to be recharged. This will help you monitor the life cycle of the battery.
Atomizer Ohm Meter: The LAVATUBE Version 2 has an atomizer ohm meter built in, simply press and hold the + button for 5 seconds and it will display the ohm's resistance of the atomizer that is connected to the device. 
Amperage Limiting: 3 amps – The device should monitor and shut itself off if it detects any excessive over-current conditions.
Vent holes: 2 Vent holes on the bottom of the device for added safety